Pervious Concrete Adhesive(XT-202)

SdHearst® pervious concrete (also called porous concrete, permeable concrete, no fines concrete and porous pavement) is a special type of concrete with a high porosity used for concrete flatwork applications that allows water from precipitation and other sources to pass directly through, thereby reducing the runoff from a site and allowing groundwater recharge.

Keywords:

Classification:

Pervious Concrete Adhesive

Telephone:

+86-531-69986351

Consulting

Description
Physical and chemical performance index

Brief Introduction of Pervious concrete

SdHearst® pervious concrete (also called porous concrete, permeable concrete, no fines concrete and porous pavement) is a special type of concrete with a high porosity used for concrete flatwork applications that allows water from precipitation and other sources to pass directly through, thereby reducing the runoff from a site and allowing groundwater recharge.

Pervious concrete is made using large aggregates with little to no fine aggregates. The concrete paste then coats the aggregates and allows water to pass through the concrete slab. Pervious concrete is traditionally used in parking areas, areas with light traffic, residential streets, pedestrian walkways, and greenhouses. It is an important application for sustainable construction and is one of many low impact development techniques used by builders to protect water quality.

Pervious Concrete Adhesive

SdHearst®pervious concrete adhesive is to use high strength of Portland cement as basic material with many different type of auxiliaries. It can increase the strength and cohesive force of pervious concrete. In addition, inorganic weather resistance pigment can be added into it, which can compose the permeable concrete of different colors.

Dosage

10 to 15 kilograms per cubic metre of pervious concrete to reach 20Mpa compressive strength.

Recommended ratio (1cbm pervious concrete)

Cement (PO.425): 350-450kg

Stone: 1600-1800kg （Particle size 0.3-0.5cm）
Pervious concrete adhesive: 10-15kg

Water: 100-110kg

Using Instruction

Firstly add the cement, aggregate, then add half of the water dosage, stirring for 30s;

Secondly add the pervious concrete cementing admixture (pigment),stirring for 60s;

Thirdly add the remaining water, stirring for 120s.

Finished

Packaging and Storage

A. Standard Packing: In 25kg paper bags inner with PE bags

B. Big Bag or other special packages are possible on request.

14Tons per 20" container with pallet

17Tons per 20" container without pallet

Store it in a cool, dry place below 30°C and protected against humidity and pressing, since the goods is thermoplastic, storage time should not exceed six months.